Drum Pulper in Waste Paper Recycling
1500/2000/2250/2500
Drum pulper breaks waste paper into pulp by rotating stirring, realizing paper fiber separation in recycling processing.
Delivery
EXW,FOB,CFR,CIF
minimum order
1 set
Supply Ability
20set / Month
Country of Origin
china
Stock Time
20Day
Quantity
US $10000.00 - US $30000.00
/ set
The rotary drum pulper is one model paper pulper, used for pulping waste paper in the papermaking industry, integrating pulping and screening.
1. Structure of drum pulper in waste paper recycling
This paper pulper mainly consists of a feeding hopper, a rotary drum, a transmission device, a supporting wheel device, a blocking wheel device, a sealing device, and a protective cover.
This paper pulper mainly consists of a feeding hopper, a rotary drum, a transmission device, a supporting wheel device, a blocking wheel device, a sealing device, and a protective cover.

2. Working principle of drum pulper in waste paper recycling
Waste paper enters the crushing area of rotary drum paper pulper, and a certain amount of water and chemicals are added to fully mix the materials. The pulp rotates upwards and then falls, and is crushed by gravity. Due to the tilting angle of the rotary drum pulper, the pulp will move forward and enter the screening area. the flushing water dilutes the pulp and good pulp be send to the subsequent section through a sieve plate pump, while large impurities are discharged from the opening at the tail of paper pulper.

3. advantage of drum pulper in waste paper recycling
Drum pulper in waste paper recycling has minimal damage to fibers,Low power consumption, continuous operation, high slag discharge efficiency, and high ink removal efficiency.
4. Main parameters of drum pulper in waste paper recycling
For drum pulper in waste paper recycling,OCC is 8%~12%, ONP is 13%~18%; fragmentation time is 15min~25min; temperature is between 45 ℃ and 60 ℃; The paper pulper speed is about 13r/min; The inclination angle of the drum paper pulper is usually 1 °; The concentration of good pulp is 3%~5%.

